Skip to Content

Wall niche · New

Cove. The niche that belongs to the wall.

One piece. Pre-cut membrane included. Visible edge in stainless steel.

1.4301Body in stainless steel V2A
30 × 30 · 30 × 60 · 30 × ∞ cmtwo formats, plus custom sizes
7 finishesbrushed, PVD or structure-coated

Build-up

The membrane comes cut to size.

The pre-cut textile membrane is supplied with the niche. On site you spread MS polymer on the flange, bond the membrane onto it and tie it into the bonded waterproofing — nothing is bricked up or reworked.

The back panel is closed and flush, so there is no joint where dirt can collect.

From shell to tile.

Keep scrolling: three steps, one picture.

Set and bond.The niche sits in the stud wall; the membrane is bonded onto the flange.
Choose the finish.Four brushed stainless steel finishes, plus three structure-coated tones made to order.
Tiled and finished.Only the edge remains visible, flush with the tile.

Technical data.

MaterialStainless steel 1.4301 / V2A (AISI 304)
Formats300 × 300 mm · 300 × 600 mm · custom sizes on request
Installation depth100 mm, for stud wall installation
FinishesEdelstahl gebürstet · Gold gebürstet (PVD) · Bronze gebürstet (PVD) · Anthrazit gebürstet
WaterproofingPre-cut textile membrane supplied; bonded to the flange on site with MS polymer, connects to the bonded waterproofing system
ApplicationShower, bathroom and wet room; new build and renovation

Ordering information.

14 variants.

Item numberSizeSurfaceMaterial
SN3-W300L300E9300 × 300 mmBrushed anthracite · structure-coated anthracite, grey or beigeStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L300E7300 × 300 mmBrushed bronze (PVD)Stainless steel 1.4301 / V2A (AISI 304)
SN3-W300L300E4300 × 300 mmBrushed gold (PVD)Stainless steel 1.4301 / V2A (AISI 304)
SN3-W300L300E1300 × 300 mmBrushed stainless steelStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600E9300 × 600 mmBrushed anthracite · structure-coated anthracite, grey or beigeStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600E7300 × 600 mmBrushed bronze (PVD)Stainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600E4300 × 600 mmBrushed gold (PVD)Stainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600E1300 × 600 mmBrushed stainless steelStainless steel 1.4301 / V2A (AISI 304)
Made to order — structure-coated stainless steelProduced for your order, minimum 5 pieces; lead time on request.
SN3-W300L300A19300 × 300 mmstructure-coated, anthraciteStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L300A21300 × 300 mmstructure-coated, beigeStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L300A20300 × 300 mmstructure-coated, greyStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600A19300 × 600 mmstructure-coated, anthraciteStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600A21300 × 600 mmstructure-coated, beigeStainless steel 1.4301 / V2A (AISI 304)
SN3-W300L600A20300 × 600 mmstructure-coated, greyStainless steel 1.4301 / V2A (AISI 304)
Custom sizes — made for your projectAny length on request; minimum 20 pieces, lead time on request.

Special lengths on request. Every channel can be cut to size on site.

Installation in five steps.

The order follows the site: shell first, tile last.

ShellCut the opening in the stud wall, fit the niche and align it.
FixingFix the body and lay the flange flat against the wall surface.
WaterproofingSpread MS polymer on the flange, bond the pre-cut membrane onto it and tie it into the bonded waterproofing, then seal the wall.
Tiling workTile the wall up to the edge and grout the joints.
FinishingPeel off the protective film last.

Specification text for tenders.

Ready to paste into your bill of quantities (German, as used in German tenders).

Wandnische Fabrikat Gruen, Typ Cove, oder gleichwertig, einteiliger Nischenkörper aus Edelstahl 1.4301 (V2A) mit geschlossener, bündiger Rückwand, Format 300 × 300 mm oder 300 × 600 mm, Einbautiefe 100 mm, für den Einbau in die Vorwand. Vorgeschnittene textile Dichtmanschette im Lieferumfang, bauseits mit MS-Polymer auf den Flansch geklebt und in die Verbundabdichtung eingebunden. Oberfläche ______. Art.-Nr. SN3-W300L___E_.

Copy text